Zhejiang hisun Automation Instrument Co.,Ltd -

Zhejiang hisun Automation Instrument Co.,Ltd

Showing 41 - 50 of 53, total 6 pages [First] [Previous] [Next] [Last]

the wafer electric butterfly valve
Specification: standard
Detail: Overview The basic design parameters Nominal size: 50-2000 - mm DN, 1 ~ 78 "" Structure length: GB, ANSI B16.10. 12221-89 Nominal pressure: PN 1.0 ~ 6.4 *** Class 150 ~ 300 lb The connection form A. the flange: JB/T 79-9...

bi-directional metal-seated butterfly valve for po
Specification: standard
Detail: Overview Features and Advantages Stem Blow Out Prevention Ring Prevent stem ejection in accidental working situation. Replaceable Disc Seal Reduce field maintenance costs. Live Loading Packing Gland Standard low emissio...

floating type metal sealing ball valves apply for
Specification: standard
Detail: Overview The basic design Style: direct to open casting ball valve DN15 ~ 400 mm, 1/2 "to 16" Through three type casting ball valve DNSO ~ 700 mm, 2 "~ 28" The length of the structure A, flange: ANSI B16.5, MSS - SP 44, J...

stop check valve of power station valves
Specification: standard
Detail: Overview Purpose Globe - check valve installed in combined cycle heat on the main steam pipe, prevent the backflow medium, failure occurs when the boiler, quickly close the valve by medium pressure, boiler safety protection ...

change the dual core main steam power station glob
Specification: standard
Detail: Chief features and usages��? For steam, water pipe as an opening and closing device. Two, applicable situation: Suitable for thermal power plant drainage etc. sealing performance of valve occasions with high requirement...

high pressure forged steel ball valve for power s
Specification: standard
Detail: The main design parameters This valve parts are forgings, soft sealing ring set into the steel ring, steel also work out sealing surface, radial steel seat and the back are equipped with "O" type circle, nothing more than to ...

electric gate valve apply for power station
Specification: standard
Detail: overview The electric gate valve is suitable for the nominal pressure PN1.6 ~ 16.0 ***,and the working temperature is - 29 ~ 550 degrees centigrade.chemical industry,hydropower and thermal power plant all kinds of the pipelin...

the power station turbine drive full welded ball v
Specification: standard
Detail: Product overview Because of the seat is made of carbide fluoro of seal ring and disc springs, so that it adaptable to changes in pressure and temperature, the annotation of pressure and temperature range will not produce any ...

power plant check valve sdh61y-320
Specification: standard
Detail: Product overview The high voltage valve pipe ends welded structure, the welding groove must be made according to the standard or user requirements, it is suitable for the thermal power plant, petrochemical, metallurgical and ...

manual gate valve apply for power station
Specification: standard
Detail: Main characteristics and USES 1��?co***ct structure, reasonable design, good rigidity, smooth channel, small flow resistance coefficient. 2��?the sealing surface of stainless steel and carbide, long service life. ...


Showing 41 - 50 of 53, total 6 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6